Sports FKM Rubber Strap in Olive for AP Royal Oak

There are 3 ways to identify the correct strap size for your Royal Oak:

1. Measure the Lug Width

Use a caliper or ruler to measure the width of the strap where it meets the case. The Royal Oak uses an integrated design where the strap must match the width of the "plots" (the metal links attached to the case):

• 26mm: The standard width for the 41mm models.
• 24mm: The standard width for the 39mm models (e.g., 15202 "Jumbo").
• 22mm: Typically found on the 37mm mid-size variants.

2. Match with Case Diameter & Generation

Strap compatibility depends on the specific generation of your Royal Oak. While there are currently three generations of the 41mm series, the straps we are offering are engineered specifically for the second generation.

41mm Second Generation Models:
The following models share the same 26mm lug architecture and are compatible with this strap collection:

• 15400: The 41mm Self-Winding.
• 26331 / 26320: The 41mm Self-Winding Chronographs.
• 15407: The 41mm Double Balance Wheel Openworked.

(Note: These will not provide a flush fit for the first generation or the current third generation (15500/15510) due to changes in case thickness and plot geometry.)

3. Check the Caseback Reference

The reference number engraved on your caseback is the most reliable way to confirm fitment. Search this number to ensure your watch belongs to the second-generation 41mm family:

• Compatible References: 15400, 26331, 26320, 15407.
• Incompatible References: 15500, 15510, 26240 (Third Gen) or 15300 (39mm).

Always consult your warranty card or original paperwork to verify your specific reference number before selecting your size.

1. Use the correct tools
Most Royal Oak Offshore models use a screw-and-tube system to secure the strap to the plots (the metal links attached to the case). You will typically need two specialized 1.6mm screwdrivers—one to hold the screw head on one side and another to unscrew from the opposite side.

2. Unscrew the lug plots
Carefully insert the screwdrivers into both ends of the lug bar. While holding one side steady, rotate the other counter-clockwise to loosen the screw. Work on a soft microfiber mat to prevent the screwdriver from slipping and scratching the brushed or polished finish of the case.

3. Remove the strap and hardware
Once the screw is removed, push the metal tube through the strap and the plots to detach the current strap. Ensure you keep the metal inserts (tubes) and screws in a secure place, as these are essential for installing the new strap.

4. Install the new strap
Align the new strap with the case plots. Slide the metal tube through the lug holes and the strap, then insert the screw. Hold one side fixed with your screwdriver while tightening the other securely. Ensure the fit is snug but avoid over-tightening to prevent stripping the threads.

If you receive your strap and find that the size is incorrect, don't worry! You can exchange them for the correct size as long as they are in brand new unworn condition. (Shipping fees applies)

If the item is available to order (not shown as out of stock), it means we have ready stock in our warehouse and can ship it as soon as we receive your order.

Our watch straps are crafted using only the finest premium-quality materials. We take great pride in the craftsmanship and durability of our products, and we stand firmly behind their quality. If you experience any issues with your strap due to a manufacturing defect within 30 days of purchase, we will replace it at no additional cost to you.

Please note that this warranty does not cover normal wear and tear, or damage resulting from accidents, misuse, or neglect.

Like to see the strap in person or require us to do the strap changing and installation for you? We are located in Singapore. Our address is 66 East Coast Road, unit 05-14, Singapore 428778. (See opening days and hours on our google page here)

Have a questiont to ask? Reach us via the contact us page here or whatsapp us at +65 91064136.